- Treated framing (dimensional) lumber
- Clear finish, kiln-dried (soft & hard)
- Cement blocks (hollow tile and pier)
- Paneling – plywood, pre-finished, particle board, hardboard and lattice
- Pre-engineered lumber – gluelam beams, parallams & truss joist
- Decking - spruce pine fir and hem fir
- Mouldings – softwood, hardwood and plastic
- Hardwood dowels
- Siding – vinyl, wood and cement fibrous
- Exterior wrap
- Sheetrock – drywall & wallboard
- Concrete mesh
- Rebar, tie wire & forming stakes
Roseburg's RFPI® Joists save builders time, and therefore money.
They can be cut and fastened with traditional framing tools and fasteners. I-Joists will not warp, twist, or shrink, and are more uniform in their dimensions than sawn lumber joists. Since I-Joists can typically be used at greater joist spacings as compared to lumber, fewer pieces must be cut and handled on the job site, making I-Joist installation less costly and less wasteful for the builder. Because I-Joists typically weigh less than half of comparable conventional framing lumber, they can be installed quickly and efficiently.
For a design guide to help you incorporate environmentally-friendly EWP products you’re your home design, visit www.rfpco.com. .
Click on these brand names for more information. Then, come in and talk with us to find out about the availability of specific products. ((Logos with links from logos to manufacturer sites))
A great majority of our lumber and plywood is treated locally at our HPM Wood Protection facility in Keaukaha.
HPM Wood Protection
We treat our lumber locally, to control quality and cost
Our Wood Protection Company in Keaukaha pressure treats a majority of all lumber and plywood using Hi-Bor®. Hi-Bor is a borate-based chemical that has proven very effective in protecting against termites, carpenter ants and fungal decay. This EPA-approved process is safe for the environment too. Structures built with Hi-Bor treated wood can also qualify for the Hi-Bor 20-year warranty.
